Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | A50 |
Automation Grade | Manual |
Machine Structure | Horizontal |
Machine Type | Hose/Pipe Crimping Machine |
Automatic Grade | Manual |
Dies | 10 |
Cycle Time | 120 seconds |
Hose Inside Diameter | 50 mm |
Maximum Sleeve Diameter | 72 mm |
Dimension | 655 x 510 x 1000 mm |
Max Opening | 155 mm |
Brand | N Power |
No Of Die Sets Supplied | 10 |
Model | A50 |
This user friendly machine is best suited for small workshops and on site jobs. This machine is equipped with features similar to those found in European brands. The working of this machine is simplified which enables even unskilled operators to use this machine. The master dies are designed to give equal crimping on all the eight segments. The quality of the dies ensures maximum life with no deformation on dies even after years of operation. Large openings are provided on the front and at the rear end. Sensor enabled Micro meter control system ensures crimping accuracy of 0.05 mm. This model have the capacity to crimp ¼” to 2” R2 hose and 1” Spiral Hose.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | EX52 |
Automation Grade | Automatic |
Machine Type | Hose/Pipe Crimping Machine |
Power Source | Hydraulic, Electric |
Machine Structure | Horizontal |
Operation | Automatic |
Voltage | 230 V or 415 V |
Opening Without Dies | 140 mm |
Surface Treatment | Powder Coated |
Product Type | Horizondal |
Model Number | EX52 |
Phase | 3 Phase |
Weight Kg | 250 |
Brand | N Power |
Max Opening | 160 mm |
Crimp Range Mm | 6 mm to 52 mm |
Automatic Grade | Semi-Automatic |
Maximum Crimping Size | 2 inches |
No Of Dies Per Set | 10 |
Additional Information:
Product Details:
Machine Type | Hose/Pipe Crimping Machine |
Automatic Grade | Automatic |
Material | Cast Iron |
Brand | N Power |
Voltage | 180-320 V |
Model | HD76 |
Crimping Range of two wire hoses | 1/4 inches to 3 inches |
Crimping range of four wire hoses | 1/4 inches to 2 inch |
Motor | 7.5 HP Crompton Make |
Power supply | 3 Phase |
No of die sets supplied | 12 |
Maximum opening of master die | 155 mm |
Width of head | 125 mm |
Maximum working pressure | 400 bar |
Hydraulic oil | SAE 68 |
Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | EX76 |
Machine Type | Hose/Pipe Crimping Machine |
Automation Grade | Semi-Automatic |
Machine Structure | Horizontal |
Brand | N POWER |
Power Source | Hydraulic |
Hose Inside Diameter | 75 MM |
Dimension | 660 x 640 x 455 mm |
Crimping Range Of Two Wire Hoses | 1/4 inches to 3 inches |
Crimping Range Of Four Wire Hoses | 1/4 inches to 2 inch |
Motor | 5 HP,3 Phase |
Maximum Opening | 135 mm |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Machine Type | Hose/Pipe Crimping Machine |
Material | Steel |
Automation Grade | Manual |
Machine Structure | Horizontal |
Brand | N Power |
Power Source | Mechanical |
Hose Inside Diameter | 6 mm to 50 mm |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | LP50A |
Material | STEEL |
Automation Grade | Manual |
Machine Structure | Horizontal |
Machine Type | Hose/Pipe Crimping Machine |
Brand | N POWER |
Automatic Grade | Manual |
Operation | Manual |
Power Source | Mechanical |
Dies | FIXED |
Power | MANUAL |
Weight | 165 kg |
Maximum Opening | 135-150 mm |
Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | C50 |
Machine Type | Cable Crimping Machine, Hose/Pipe Crimping Machine |
Automation Grade | Semi-Automatic |
Machine Structure | Horizontal |
Voltage | 415 V,230 V or 415 V |
Crimping Capacity | Mm 6 mm to 52 mm |
Opening Front Side | 155 mm |
Maximum Inside Opening Without Dies | 110 mm |
Maximum Working Pressure | 315 bar |
Product Details:
Minimum Order Quantity | 1 Piece |
Machine Type | Hose/Pipe Crimping Machine |
Automation Grade | Automatic |
Machine Structure | Horizontal |
Brand | N Power |
Operation | Automatic |
Power Source | Hydraulic, Electric |
Voltage | 230 V or 415 V |
Opening Without Dies | 110 mm |
Max Opening | 110 mm |
No Of Dies Per Set | 10 |
Model Number | C50 |
Product Type | Horizondal |
Phase | 3 Phase |
Surface Treatment | Powder Coated |
Weight Kg | 250 |
Crimp Range Mm | 6 mm to 52 mm |
Automatic Grade | Semi-Automatic |
Maximum Crimping Size | 2 inches |
Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | H100 |
Machine Type | Hose/Pipe Crimping Machine |
Brand | N Power |
Material | HYDRAULIC HOSE CRIMPING MACHINE |
Automation Grade | Semi-Automatic |
Machine Structure | Horizontal |
Capacity | 4 INCHES |
Design | Standard |
Power Source | Hydraulic |
Hose Inside Diameter | 100 MM |
Crimping Capacity of 2 wire hose | 4 inches |
Crimping capacity of 4 wire hose | 4 inches |
Opening at Front side | 240 mm |
Maximum inside opening without dies | 185 mm |
Opening at Rear end | 205 mm |
Maximum working pressure | 315 Bar |
Kilowatt of motor | 5 HP |
Voltage | 415 V |
Flow of pump | 10 Litres |
Capacity of oil tank | 120 Litres |
Number of dies | 14 |
Sizes of dies | 15,19,23,26,31,36,41,47,55,63,75,105,116,135 |
Noise level | <75db |
Speed (Number of cycles per hour) | 200 |
Weight of the machine | 500 Kg |
Dimensions of machine (L x B x H) | 900 x 600 x 1050 mm |
Dimensions of Export packing /wooden box) | 1050 x 640 x 1150 mm |